Help, I stiped my trigger guard back screw

[justeric]

After reading the AccuStock directions I made a dumb mistake. I thought the back screw of the trigger guard (for my 10 FCP - K) was the third screw and tried to tighten it down to 40 pounds. I know, what a dummy. I was still able to screw the stripped screw in but I am not able to apply much torque. Does anyone have a suggestion on how to fix the problem? Is there another screw one size larger that Savage makes for dummies like me?

Thanks,
Eric

[scamp62]

Use larger screw or fill old hole with 30 min epoxy, let it set up, then drill a pilot hole and the use old screw

[justeric]

Thanks again scamp! Hey did you bed your 10 FCP -K?

[scamp62]

skim coated