Question about putting an AccuStock back on

[justeric]

Below are part of the directions on how to put the AccuStock back on the action. Step 3 says to Tighten the forward most screen to 10 pounds. Is the forward most screw the Accu Wedge screw?

3. Tighten the forward most screw to 10 in.-lbs. to seat the action against the aluminum rail boss, then back out one-half turn.

4. Tighten the middle action screw to 10 in.-lbs.

5. Tighten the rear action screw to 10 in.-lbs.

6. Tighten the forward action screw to 10 in.-lbs

[bodywerks]

Yes.

[justeric]

Thanks for the information!