Reply With QuoteDepends on the throat in your barrel.
started loading my akeley and was curious as to what grain bullets aguy has to start jammin in the lands?
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Depends on the throat in your barrel.
Are you referring to when you are fire forming brass to help keep the case tight?Originally Posted by bobcat30
Depends on the length of your throat.I found that my 243AI could seat a 95gr Sie Match King a long way before the ogive touched the lands.You need to determine it for every different bullet.OAL will vary,but base of case to ogive should be close to the same.My barrel had very little freebore with the lands engaging about .1 in front of the chamber(neck).I say ,"HAD" because it is getting rebarreled (don't ask),so will work it up over again when I get the rifle back.
Your C.O.L. will change about every 200 rounds down the pipe on a 243. I use a Stoney Point gauge and Sinclair comparator and all that. But you can measure a bullet dropped in the bore with jerry rigged rods. I used to just seat a bullet out long. Chamber it. Then measure the rifling scratch with calipers and a magnify glass. Whatever the scratch length is will be a rough + contact datum point. For a while.
Posting Permissions
Bookmarks