If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.
hello all
I have a factory bottom metal for a dbm
can I use this to replace a stagger feed blind mag?
Thanks for the help
If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.
The Dunning-Kruger effect is alive and well.
The mag, the mag port and magwell is more foreward on a stagger feed long action and stock. I have never tried the conversion but I have modified a SF LA stock to fit a CF Long Action. Thy say a Dremel or pencil grinder in the right places on the action will get you there but that is for someone else to determine if they have that skill.
The Dunning-Kruger effect is alive and well.
Bookmarks