staggerfeed and dbm

**110fp** · 03-23-2017, 07:49 PM

hello all

I have a factory bottom metal for a dbm
can I use this to replace a stagger feed blind mag?

Thanks for the help

**Robinhood** · 03-23-2017, 10:40 PM

If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.

**hereinaz** · 03-24-2017, 10:24 AM

Originally Posted by Robinhood

If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.

Location of the mag is wrong in long action? How is that, never attempted that, but I am curious now.

**Robinhood** · 03-24-2017, 08:08 PM

Originally Posted by hereinaz

Location of the mag is wrong in long action? How is that, never attempted that, but I am curious now.

The mag, the mag port and magwell is more foreward on a stagger feed long action and stock. I have never tried the conversion but I have modified a SF LA stock to fit a CF Long Action. Thy say a Dremel or pencil grinder in the right places on the action will get you there but that is for someone else to determine if they have that skill.