I had to do a little touching-up of the bedding on my .222. No resin, just a bit of scraping here and there. Have done nothing else. It's about 2 MOA with my own load of a 50 grain Dogtown on top of 23 grains of 8208XBR. Have never fired factory ammo in it. Scope is an old steel Weaver 4x on that stamped Williams mount. Check that mount if you use one. It needs to be bedded to the receiver. I used a piece of printer paper saturated with Loctite. Grease the screws so they don't get glued in. It could also be lapped, but I wasn't energetic enough that day.
Bookmarks