Take a flat blade screw driver , put it on the rear lip on the mag box were it sets in the receiver
then hit it with a mallet or your hand
do the same to install
I have a Model 16, 4.275", Accutrigger and want to know how to remove mag box. Box is staked in at front.
Any advice will be appreciated.
Take a flat blade screw driver , put it on the rear lip on the mag box were it sets in the receiver
then hit it with a mallet or your hand
do the same to install
From top or bottom to remove?
Compliments of Boots McGuire http://www.savageshooters.com/conten...d-CF%29/view/2
The Dunning-Kruger effect is alive and well.
Bookmarks