Results 1 to 2 of 2

Thread: Mag failure to feed

  1. #1
    Ldj111
    Guest

    Mag failure to feed


    I have a brand new 64. The very first time I loaded the mag with 10 rounds it would not feed the first round into the chamber. I had to remove the mag and pry the top round back out. With 9 in the mag it would feed. Yesterday I was at the range and I loaded the mag with 9 and it would not chamber the first round. I ended up loading only 8 for the rest of the session. Is this possibly a bad mag? I did try it with 10 again and it didn't work. So I took one out, but still no good. Only seems to work with 8 in the mag.

  2. #2
    Bigguns
    Guest
    Mine did it yesterday, out of the box too, but it only did it once, I shot 75 Rnds with it

Similar Threads

  1. Another SSS failure
    By dskogman in forum Vendor Feedback
    Replies: 1
    Last Post: 11-15-2016, 10:09 AM
  2. Model 10FCP .223 first round failure to feed
    By MNGunner in forum 110-Series Rifles
    Replies: 12
    Last Post: 03-02-2016, 12:46 AM
  3. Possible leupold failure
    By jordan in forum 110-Series Rifles
    Replies: 9
    Last Post: 12-29-2014, 01:21 PM
  4. Failure to eject.
    By Tack in forum Axis Series Rifles
    Replies: 4
    Last Post: 02-06-2014, 01:48 PM
  5. Savage P.A.D. failure
    By Werewolf in forum 110-Series Rifles
    Replies: 1
    Last Post: 08-08-2011, 12:22 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •