Anyone try an HS stock with the 220?
https://www.hsprecision.com/shop2/ri...-stock-pst129/
long action centerfeed, I think that I read somewhere the bottom metal was shorter on the 220 than rifle 110's?
Anyone try an HS stock with the 220?
https://www.hsprecision.com/shop2/ri...-stock-pst129/
long action centerfeed, I think that I read somewhere the bottom metal was shorter on the 220 than rifle 110's?
Don't hold me to this as it's been awhile since I've had my hands on a 212 or 220, but if memory serves me right they have a larger diameter action and the screw spacing may be different. I do know for a fact they're not a drop-in fit for a 10 or 110 stock.
Had to do a little digging, but I found my verification.
Here's a comparison of the bottom metal for a long action, 220F and a short action. The footprint of the 220F bottom metal matches the short action, but the screw spacing of the 220F is the same as a long action. So no, that stock won't work for your 220F as the inlet for the bottom metal would be wrong.
I don't know of anyone making an aftermarket synthetic stock for the 220F, but laminate stocks are available from a couple suppliers.
Bookmarks