what is the trigger in an Axis?
what is the trigger in an Axis?
what is the trigger in an Axis?
triggerus horribilis
Originally Posted by wbm
wbm, you won the internet for today.
It is a simple strong trigger that is very easy to fix for a buck. It is then a very good trigger. See the fix on this site or you tube.
I've done the g2 spring mod, overtravel screw and quite a bit of polishing, but I'm still at 3.5lbs.
Seriously considering a RB trigger for mine...
I think I got my Axis trigger down to 2 1/2 lbs with a ball point pen spring and polishing, but I still went with the Rifle Basix and it is at 14 oz right now. It was pricey compared to the cost of the rifle, but is a nice trigger.
Is that in or out of the stock?
I have found it can rub in two place when in the stock. Check the head of the over travel screw isn't touching the stock. Also near the front of the trigger can be hitting the stock. It won't let me post a picture, but look for a rub mark on the black metal just up from the blade part that engages the sear.
It's a non accutrigger with a pretty hard pull (at least 7+ lbs). Checkout the axis II as it has the accutrigger.
Axis should be checked for safety function as well.
1. Cock
2. pull safety button rearward
3. pull trigger hard.
4. harder
5. push safety forward to "fire" position
6. should not "fire" untill trigger is pulled.
Axis often pass the "bump test" but not the "pull trigger with safety on, then turn off safety" test.
Agreed. Bump test alone isn't enough.
Posting Permissions
Reply With Quote
Bookmarks