Results 1 to 5 of 5

Thread: 1st Generation Short Action Scope Mount

  1. #1
    Team Savage Carvera's Avatar
    Join Date
    Dec 2006
    Location
    Utah
    Age
    45
    Posts
    215

    1st Generation Short Action Scope Mount


    I need a one piece base/scope mount for a 4.522" screw spacing short action.

    I assume that regardless of the action screw spacing, that what I should be after is a flat rear, staggered feed, short action base?

    Can anyone else confirm this?

  2. #2
    Basic Member
    Join Date
    Feb 2016
    Posts
    27
    I've got a 110 in 243 from 1958 that came with a one-piece Redfield mount. It measured to about 5.3125 (5 5/16") on my 110 SA. I believe a SA flat back mount should be good to go even on the early ones.

  3. #3
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,091
    Found under FAQ section http://www.savageshooters.com/conten...Action-Lengths, I'm guessing that is correct. The over all length of the action did not change.

    ******LOOKED A LITTLE CLOSER, the action length did change, so now I'm not sure!*******

  4. #4
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,408
    IIRC the 1st Gen short actions had a unique base length and to my knowledge nobody's made a 1-pc base for them in a long time. Most guys just use a 2-pc base system for a 110 long action as those will work just fine.

    Frank Green at Bartlein Barrels came up with an alternative solution a few years back, but it requires some machining to work.
    http://forum.snipershide.info/showthread.php?t=178320

  5. #5
    Basic Member RustyShackle's Avatar
    Join Date
    Apr 2016
    Location
    N.Ida
    Posts
    673
    I had one. Bought the base this past year from midway. I'll look up my order and report back with details.

    I take that back. It came from Numerich. I see that they no longer show the item???

    Looks like a 2 piece is probably the most cost effective way to proceed.

Similar Threads

  1. 1st generation short action
    By eliwhitley in forum 110-Series Rifles
    Replies: 1
    Last Post: 02-03-2018, 01:32 AM
  2. 1st Generation Short Action Build
    By Hvylvy in forum 110-Series Rifles
    Replies: 5
    Last Post: 04-11-2017, 11:41 AM
  3. first generation short action firing pin parts?
    By Jeff518 in forum 110-Series Rifles
    Replies: 3
    Last Post: 06-30-2015, 08:30 AM
  4. Replies: 1
    Last Post: 01-17-2015, 08:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •