Putting back together my trigger assembly on action after bedding my new stock and have encountered a puzzler.
I am dumbfounded on how the sliding thumb switch attaches to the safety tab that sticks up through the slot in the tang. When I removed, I thought the thumb switch had a grove underneath that locked onto the safety tab to keep it tight but that doesn't appear to be the case.
I figured there would be a video or some instructions on the net to explain but I struck out.
The top of the safety tab that sticks up through the tang has grooves cut into it, so I thought maybe glued, but no evidence of that.
I'll probably have a doh moment once explained, but I am buffaloed.