My 308 Axis,of which is new. I bought it 3 years ago but it set in my gun safe till this fall. Now i want to get it shooting well and give it to one of my sons !
I have installed a Rifle Basics trigger and worked on the stock and bought extra mags for it.
I have worked on loads and with a scope set at 4X it will group 1 1/2 to 2 inch groups at 100 yards. No just one here and there but 4 or 5 groups in a row!
My problem with it is this : It picks up the shell from the mag and after it is 3/4 of the way into the chamber it hangs up? I have to like leave off on it and pull the bolt back a hair then push it forward to go in the rest of the way and then lock the bolt down to fire!
Any ideas on what is going on with this ????? The COL of the loads is not excessive in length and i ckeck my brass for chamber fit before loading it and it goes in well with no binding !