Savage 111 Trophy Hunter Barrel Spec?

[James John]

Anyone have the diameter of the end of barrel? Can it b threaded to 5/8-24?

[Zero333]

I don't think so.

Just measure a 22" 243win barrel and it was 0.58" = 19/32"

and a 24" 300winmag at .56" = 9/16"

at the muzzle.

I do recommend getting a Kahntrol solutions Clamp On Muzzle Brake – KSMB585

They are very effective, and the one kahntrol clamp-on brake I have on a bull barrel (1" at muzzle) is the best at reducing recoil compared to other brakes I have.

https://kahntrol.com/clamp-on-muzzle-brake/

[James John]

I have an omega supressor sitting here

[Zero333]

If you cut the barrel back down to around 18", it will give you enough meat.

[BrushyHillGuide]

I believe you need .75 (minimum) thickness to thread 5/8-24. FWIW - I had no problem with a 10/110 Predator Hunter 6.5 CM. I'm not familiar with the 111 and I don't know what caliber you're shooting. Do you have calipers you can use to measure the diameter of the end of your barrel?


Sent from my iPhone using Tapatalk