My old Savage 110 flat-back with a NSS recoil lug and barrel nut, EGW scope base, and McMillan HTG stock. I'll see how it shoots with the factory barrel, but future plans are to re-barrel in 308 with a Rock 5R varmint barrel. It will be a switch-barrel gun. I have a magnum bolt head and will have another barrel in 300WM

I routed the factory bedding and laid down a good layer of Marine Tex last night. I got it all trimmed and cleaned up. Here's the process for anyone who's interested...

**NOTE** For anyone who wants to duplicate this, make sure you free-float the heel.









Recoil lug routing...


Clayed, taped and release agent applied...


Leave the back of the recoil lug exposed, tape the sides and front...


More clay...


Action set in the stock, epoxy cleaned off and factory screws inserted, coated with grease to prevent seizure...