Pic of SSS LRBR Rose/ Brown/ Black- in the finishing process! Cool Color.

[savageboy]

It looked so pretty sitting here on my back deck drying the 5th coat of clear poly on it, I had to share. The cheek piece is cocked as it is wet and drying. 5 more coats to go!
Its bedded w/ Devcon, waiting for the nutless barreled action seen below, PTG oversized fluted bolt, Ferrel base, Burris Sig. Zee Rings, and Nightforce 12-42X BR NP2DD scope. Cal. 6brx 28" finish length, Kreiger gain twist 8.7-8.3"
[img width=600 height=398]http://i64.photobucket.com/albums/h163/2139882/DSC_0315.jpg[/img]
[img width=600 height=398]http://i64.photobucket.com/albums/h163/2139882/DSC_0316.jpg[/img]
[img width=600 height=398]http://i64.photobucket.com/albums/h163/2139882/DSC_0150.jpg[/img]
[img width=600 height=398]http://i64.photobucket.com/albums/h163/2139882/DSC_0153.jpg[/img]
[img width=600 height=398]http://i64.photobucket.com/albums/h163/2139882/DSC_0154.jpg[/img]

[pdog06]

Looks great Bob.. Cant wait to see the finished product.

[savageboy]

Thx Mike, me too!

[thunderchief]

Gorgeous, that stock is beautiful with the gloss clear.

[Stellar]

Very nice. I have the same stock in blk/grey without the cheek piece; I like it a lot and will be bedding it soon. Question: Did you remove any material before you bedded the action? I assume it came with pillars installed like mine.

[savageboy]

I had to widen the barrel channel due to the thickness of the barrel so that it free floats. The recoil lug slot was very generous even w/ the wider SSS recoil lug. I didnt have to relieve anywhere around the action. I used lamp black too to check everything several times. It came out really good w/ the Devcon. I used enough this time. Most times I don't then have to add some a 2nd time!

[stinkitup]

Awesome stuff savage boy, when you get that polished barrel and action in there it will really make it come alive.

[pa hog]

Nice looking stoc that's one of my favorite laminate color combo's

hi-teck- Probably because he's running a 56mm scope and to get a good check weld a adjustable comb will help.

[savageboy]

You got it, I have a Nightforce 12-42x 56mm scope, I shoot F class- so prone off the ground, I found w/ my current rig, as nice as it is w/ the Stockade LRBR stock and a bunch of lead in it, I just cant be as comfortable as I want and wanted an adj. cheek weld to get my eye in perfect alignment. Everything matters at 1000 yds. A more consistant cheek weld will at least indirectly, if not directly improve my consistancy and ultimatly score. Since this is my 1st real planned 100% prior to even purchasing a part "big boy" build and not an evolution like my current 260AI rig I am getting it exactly how I want it!

[bodywerks]

Is that a savage factory receiver that is just polished or a completely custom action. Regardless, I'd be interested in more info...