Results 1 to 9 of 9

Thread: Savage 10fp-sr metal trigger guard and DBM.

  1. #1
    Basic Member
    Join Date
    Jun 2008
    Posts
    159

    Savage 10fp-sr metal trigger guard and DBM.


    The "new" Savage 10fp-sr http://savagearms.com/firearms/model/10FCPSR comes with a metal trigger guard? Also, the Accurate Mag DBM will fit without modifications? The scope base include with the rifle is a EGW?

  2. #2
    Basic Member Zero333's Avatar
    Join Date
    May 2016
    Location
    ON, Canada
    Posts
    783
    The OLD fcp-sr had a aics bottom metal and accurate mag.

    The New fcp-sr has a regular Savage bottom metal and the 10 round mags are just extended Savage mags sort of like the Darkeagle 10rd magazines for factory savage bottom metal. No Accurate mag will fit in there.

  3. #3
    Basic Member
    Join Date
    Jun 2008
    Posts
    159
    Yes I know Accurate Mag magazine will not fit in the Savage bottom metal but the Accurate Mag DBM (detachable box magazine) will fit in the stock of this rifle without modifications?

  4. #4
    CrAzYLoCaL
    Guest
    Yes the new FCP has a metal trigger guard. No, the scope base is not EGW or 20MOA. But..... again, no Accurate Mag will fit in there unless you use their bottom metal. Accurate Mags have their mag release at the rear of the mag, the stock Savage bottom metal has its mag release in the front of mag. My 2 cents

  5. #5
    Basic Member Zero333's Avatar
    Join Date
    May 2016
    Location
    ON, Canada
    Posts
    783
    Accurate mag bottom metal will replace the stock savage bottom metal with out any problems. Straight swap.

    Bolt release on the New FCP-SR is at the top which is good, because rifles with bottom bolt release don't jive with aftermarket bottom metals, and require either a sear swap (which requires the top bolt release sear to be cut and welded on an angle to clear the receiver and the stock must be cut where the top bolt release goes through ir) or some other means of releasing the bolt. But this doesn't matter with the new fcp-sr.

  6. #6
    Basic Member
    Join Date
    Jun 2008
    Posts
    159
    Thanks for the replies, now I need to find where I can buy a Accurate Mag DBM because they do not ship to Canada.

  7. #7
    Basic Member
    Join Date
    Aug 2016
    Location
    Montreal, QC
    Posts
    17
    Quote Originally Posted by Buster95 View Post
    Thanks for the replies, now I need to find where I can buy a Accurate Mag DBM because they do not ship to Canada.
    You might try coretac solutions. I recall seeing them there. If they do indeed fit the 10FCP, I would love to pick up a few. I can't find any more original Savage 10 rd mags.

  8. #8
    Basic Member Bimmer's Avatar
    Join Date
    Jan 2015
    Posts
    95
    Quote Originally Posted by gurpgork View Post
    I can't find any more original Savage 10 rd mags.
    They're available from Savage... Savage keeps making them, though they suck.

  9. #9
    Basic Member
    Join Date
    Aug 2016
    Location
    Montreal, QC
    Posts
    17
    Quote Originally Posted by Bimmer View Post
    They're available from Savage... Savage keeps making them, though they suck.
    The couple I have work. I wasn't aware they were unreliable. Unfortunately Savage doesnt ship to Canada. I'd pick up an Accurate Mag for my 10FCP. Any way to tell which one? There seem to be 3 options in 308.

    I'm told that the Magpul MAG579 fits from a regional vendor. Haven't seen a single confirming note on the Web, though. Hate to chase the wrong product with good money.

    Any help would be appreciated.

Similar Threads

  1. Savage 10 bottom bolt release metal trigger guard.
    By Buster95 in forum 110-Series Rifles
    Replies: 0
    Last Post: 04-26-2018, 04:01 PM
  2. Savage Hog Hunter metal trigger guard.
    By Buster95 in forum 110-Series Rifles
    Replies: 1
    Last Post: 12-22-2016, 10:08 PM
  3. Savage 111 metal trigger guard.
    By Buster95 in forum 110-Series Rifles
    Replies: 4
    Last Post: 12-14-2015, 05:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •