The accustock bottom metal will work but you'll also need a magazine for it because yours will not work on the regular bottom metal.
I have a model 11 sa that i would like to build around. It has the bottom bolt release and I would like to use a bell and Carlson stock like I have on my model 12. The model 11 doesn't really have any bottom metal. If I ordered model 12 accustock bottom metal from savage would that work and allow me to use the b&c stock. Is there any other components I would need to buy
The accustock bottom metal will work but you'll also need a magazine for it because yours will not work on the regular bottom metal.
for the mag, just get the bottom piece. It's metal and replaces the plastic one you already have. The rest of the mag parts are identical.
All you have to do is cut off the plastic locking piece on the magazine bottom and it will work. No need to change magazine bottoms.
They can use the same bottom metal.
Make sure your stock inlet is right for whatever set you get.
I've used 12 bottom metal and PTG on my 11
i called savage and they sold me the bottom metal and the magazine bottom and new bolts fit perfect and no issue there i installed a boyds stock like 2 days ago
Bookmarks