Ok I tried using jb weld for bedding my rifle and used kiwi shoe polish and playdoe for release. Now I let it dry over nite which was only 7 hours. When I took the action off some of the jb weld peeled off and the recoil lug pulled out of the stock. So I was easily able to peel all the bedding off with a screw driver as a scraper it didn't just fall off but it did come off if I tried. What caused it to peel? What should I use to glue the recoil lug back in with? Also should there be bedding I front of the recoil lug were the barrel but goes? Any help would be great.