I have an old B&C blind mag Duramax that I know I got working good a few years ago with a centerfeed 110. I trade components around a lot, ended up with the stock on a staggerfeed and now want to put it back on the centerfeed. There is clearly more space than needed in the magwell and no slot for the L-clip but I must have worked through all that before. The magazine is flopping around in the well and also sticking too far up, impeding bolt travel. The L-clip would solve some or all of the problem but since there is no recess for it in the bedding surface, it makes the tang stick up and/or prevents the front action screw from engaging.
This is proof if proof were needed that I am getting dumber by the day. Can anyone tell me what I'm forgetting?