Extractor for old 340D 222 Help

[snider6464]

I have a old model 340D .222 and I believe that the small brass colored insert retained by the flat spring, is wore and I am looking to replace it
I have found this
http://www.gunpartscorp.com/catalog/...790C&catid=633
but no luck sold out.
Extractor, .222 & .223 Cal. - Small Brass Colored Insert Retained By Flat Spr
SAVAGE
340B, 340C, 340D, 340V
Product No. 327790C

Any one have other options or know somewhere I could find it?
I thought maybe another option would be to replace the bolt head to the band type extractor with they have in stock...

Any help would be great thanks!

[bill_meilahn]

Been there, done that. The only 223/222 bolts or bolt heads I have seen or been able to find that have the band-type extractor do not have a plunger ejector built into the bolt face. That means you have to retrofit to the flipper-type ejector on the side of the receiver. On both guns I have converted to 223, the slot for said flipper ejector was too short for the flipper, and I had to mill out an extension for the slot in the side of the receiver.