Bolt part # comparison, 12 Target action, .223 to Std, LH

[brgipple]

Hey everyone, thought i would share some in formation i found in doing some research. I am changing my 12 LRPV from .223 to 6.5CM. As the helpful people here pointed out his comes with some bolt changes. i was looking for the all the parts that were different and came up with the below list (these are for stainless parts, not blued) (and a LH port). hope this helps someone else in my shoes down the line

Disclaimer: verify with savage before taking my word on the part numbers!

Name	Diagram Number	Part Number .223	Part Number Std
Firing Pin Assembly	11	>	107348
Cocking Piece	11B	>	107345
Cocking Piece Lock Washer	11C	>	103494
Main Spring	11D	>	104279
Washer Firing Pin Stop Nut	11E	>	100303
Firing Pin Stop Nut	11F	>	107344
Firing Pin Short Magnum	11G	>	107343
Bolt Assembly	12	108392	108393
Cocking Piece Pin	12A	>	107346
Rear Baffle	12B	>	106164
Target Bolt Handle	12C	>	108189
Cocking Piece Sleeve	12D	>	107347
Bolt Body	12G	>	107480
Bolt Retaining Pin	12H	>	103978
Front Baffle Washer	12I	>	100293
Front Baffle	12J	103321	103322
Bolt Head, LH, Ground	12K	107481	107482
Extractor	12L	102278	100139
Extractor Spring	12M	>	100257
Extractor Ball	12N	>	100214
Ejector	12O	>	100129
Ejector Spring	12P	103611	100131
Ejector Retaining pin	12Q	>	100130
Bolt Assembly Screw S.S.	12S	>	102522

I did not see this posted anywhere else, sorry if this has already been posted.

[RC20]

Nice, very good, had not seen that information as well.