The inletting for a DBM and the hinged floorplate are the same, both are interchangeable. The inletting is different for a top vs. bottom bolt release.
The bottom metal is the same for both, only the trigger guard differs between the two.
I have an older wall mart package 308 FXP with the non-accustock blind mag center feed. I am looking high and low for a factory or nice boyds wood stock with 4.4 spacing for a center feed. I wouldn't mind converting to a detachable magazine but it looks like there is one that the hinge lever is on the mag and one that is one the bottom plate. Is a DBM stock also compatible with a hinged floorplate? And is there any differences with fitting of a top bolt release vs bottom bolt release trigger guard?
The inletting for a DBM and the hinged floorplate are the same, both are interchangeable. The inletting is different for a top vs. bottom bolt release.
The bottom metal is the same for both, only the trigger guard differs between the two.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Found a wood bottom bolt release stock but mine is a top release. I can either try to inlet the stock for top release or convert to a bottom bolt release trigger guard.
Bookmarks