Results 1 to 4 of 4

Thread: Factory Division match etc questions

  1. #1
    Team Savage
    Join Date
    Feb 2007
    Location
    Georgia
    Posts
    1,524

    Factory Division match etc questions


    Question....

    What sort of Factory Division Matches are run, just in general.

    Also as far as Savages, does it have to be an off the shelf rifle ??

    IE could you use buy an action from northlander, keep it stock but maybe have it timed and trued, put a factory
    Savage barrel on it, factory recoil lug, a factory stock and bed it ?? and would that work ??

    IE assuming I built up the same rifle as a factory model with an undesignated action ??

  2. #2
    Basic Member
    Join Date
    Aug 2009
    Location
    millbrook,al.
    Posts
    487
    good question but with the rifles you see out now that are factory built there has to be a certain quanity that would have to be produced to be factory i would think. when i first started shooting my lrpv at our local 33 yrd f class matches some complained becuase it so close to being a custom rifle (it just plain out shot the good ole boys with hunting rifles) .the match director refered to the nra rules and said its as legal as any other.

  3. #3
    Basic Member memilanuk's Avatar
    Join Date
    Dec 2006
    Posts
    587
    For F-Class... I personally haven't ever seen any 'factory' class matches, as there is no officially recognized division or category under NRA rules. F/TR does see a lot of fairly stock rifles such as the 12 F/TR, but there is no requirement as such. Personally I'd just build up your rifle as an F/TR rig per the NRA rules and don't bother worrying about classes that don't exist outside of individual local clubs.

  4. #4
    Basic Member
    Join Date
    Aug 2009
    Location
    millbrook,al.
    Posts
    487
    1 thing our club had from time to time is a hunter class timed 10 rnds each stage in 10 min bench 300,prone 200 and standing 100 yds

Similar Threads

  1. Mark I/II/93R: Match Grade .22lr Factory Rifle
    By TXCOONDOG in forum Savage & Stevens Rimfire Rifles
    Replies: 40
    Last Post: 06-07-2015, 05:14 PM
  2. 6mm Match Bullets for Factory Rifles
    By beartooth91 in forum Ammunition & Reloading
    Replies: 3
    Last Post: 01-12-2013, 12:28 AM
  3. Recommendations for factory match ammo (in 223)
    By jhelmuth in forum Ammunition & Reloading
    Replies: 11
    Last Post: 08-22-2011, 08:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •