Not blued but gunkote finish http://www.darkeaglecustom.com/miscellaneous.php
Who makes a blued machined recoil lug for a small shank savage 111 ?
Not blued but gunkote finish http://www.darkeaglecustom.com/miscellaneous.php
Krylon.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Rust blue that thing! Actually pretty darned easy! I just did a full receiver, recoil lug, and bbl nut. Turned out great!
The 4140 PTG recoil lug that I did worked fine. Took a couple more coats than the receiver but coloring matches almost perfectly. Actually unless in very bright direct sunlight it looks identical. Guess I was assuming that he was using the 4140. My apologies.
Oh, and I used LMF rusting solution.
Also that is a fine service you are offering Foxx!
Edit(just decided to look around and I see EGW offers a blued recoil lug for savages or at least that's what it looks like)
https://www.tacticalworks.com/EGW-Recoil-Lug-Savage.html
Last edited by RustyShackle; 05-31-2016 at 09:40 PM.
and like-wise, I had not seen those were Chrome Moly.
The ptg doesnt have a index pin? Chrome molly can be cold blued?
Does anyone know the black finish on these Eabco ones? Is "savage accuracy" the actual brand?
http://www.eabco.net/Savage-Accuracy...s_p_14766.html
Yes, if you want blued parts, you need to start with chrome moly.
I used a hardened steel wood nail, could have done without. I have use of only one arm/hand, and still could have kept it straight easily.
Last edited by Dave Hoback; 06-03-2016 at 10:29 AM.
Interesting that .00025" made that much difference.
The Dunning-Kruger effect is alive and well.
Banned
Bookmarks