Well guys I tore the stock off my 18 year old 110 30-06 that had seen better days for sure. Not expecting much since it's just factory wood.


I spent the better part of 3 hours sanding, wetting and drying and sanding some more.


I got it super smooth and brought what grain I think was going to come out, out.



Hand rubbed in some minwax "gun stock" stain.


Plan to let it dry a few days and start hand rubbing in some boiled linseed.

Am I missing anything? I don't usually do this but the sun was shining and felt like a good project to do while sitting in the yard!!

Thanks


Sent from my iPhone using Tapatalk