Some may remember my FCP-SR in the Bell&Carlson shooting like this out the box?



So I have bedded the action and installed a Rifle Basix Sav-2 trigger!




Prep work.


I was happy with my first try at bedding.


Then I installed the SAV-2, adjusted to a consistent 1lb 4 oz pull. I like this trigger! I tried swapping out the stock accutrigger spring with a lighter one from Gun Shack.(great customer service) but I could not get it below 1lb 14oz.



This is how it shot factory ELD-M 140g at 100 yards after the mods! I really like this rifle, it will be interesting to see if I can improve with a dialed in hand load.