6.5 Creedmoor project update!

[rmilobrown223@hotmail.com]

Some may remember my FCP-SR in the Bell&Carlson shooting like this out the box?



So I have bedded the action and installed a Rifle Basix Sav-2 trigger!




Prep work.


I was happy with my first try at bedding.


Then I installed the SAV-2, adjusted to a consistent 1lb 4 oz pull. I like this trigger! I tried swapping out the stock accutrigger spring with a lighter one from Gun Shack.(great customer service) but I could not get it below 1lb 14oz.



This is how it shot factory ELD-M 140g at 100 yards after the mods! I really like this rifle, it will be interesting to see if I can improve with a dialed in hand load.

[homefrontsniper]

My LPR SHOT a 1.24" and a 1.30" with Berger 140 hybrid

[rmilobrown223@hotmail.com]

You lost me there, you ment to say .24"?

[homefrontsniper]

[QUOTE=rmilobrown223@hotmail.com;367306]You lost me there, you ment to say .24"?[/QUO


1.24" 1.30" @ 500 yards

[rmilobrown223@hotmail.com]

OUTSTANDING! I have some 140g Hybrids to try out, do you mind sharing your load?

[homefrontsniper]

42gr. H - 4350
Hornady brass
CCI BR primers
2860 fps
just Kissing the lands

[rmilobrown223@hotmail.com]

Thanks!

[Lorenzo]

Really cool gun. Trying to decide if I want that same stock. I have a problem with my pinkie finger hanging off the end of pistol grips on stocks and handguns. Im thinking Hog Hunter with the B&C A2.