Results 1 to 7 of 7

Thread: vortex 34mm rings?

  1. #1
    Basic Member
    Join Date
    Sep 2012
    Age
    53
    Posts
    25

    vortex 34mm rings?


    I have a burris xtr II 4-20x50 in the box that needs rings but I do not know what height. I have a rifle class but I will not be home until 2 days before the class and wanted to order rings so they are waiting for me when I get home. The specs say the o.d of the scope is 58mm plus there will be covers on the scope. The warne base is a 20moa with pretty much a bull barrel. From my math I came up with around .94 for the ring size so the .92 would probably be too small. How much does the 20degree base mess with the height needed for the rings? Would the 1.0 height rings work or would they hit the barrel? Thanks.
    Last edited by originaljk; 05-23-2016 at 01:50 PM.

  2. #2
    Basic Member tric3imagery's Avatar
    Join Date
    Mar 2016
    Posts
    43
    Man just Web it. Yes it's 34mm http://www.burrisoptics.com/scopes/x...cope-4-20x50mm

    Sent from my SM-G920V using Tapatalk

  3. #3
    Basic Member
    Join Date
    Sep 2012
    Age
    53
    Posts
    25
    In the first sentence I did write size rings so I guess that was my bad, corrected to height rings. I know the size of the scope so just looking for height info from someone that might have a similar setup with the 20moa.

  4. #4
    Basic Member
    Join Date
    Oct 2015
    Location
    North Carolina
    Age
    56
    Posts
    443
    On my Vortex Razor II 3-18x50 I used .92" rings without a problem on my rifles with 20 MOA bases but I switched to the 1" height for use on my Surgeon action as the base is machined into the receiver and sits lower and bolt on bases. If you wanted to be safe then go with the 1" height rings as there isn't a really big difference in feel.

  5. #5
    Basic Member tric3imagery's Avatar
    Join Date
    Mar 2016
    Posts
    43
    Quote Originally Posted by originaljk View Post
    In the first sentence I did write size rings so I guess that was my bad, corrected to height rings. I know the size of the scope so just looking for height info from someone that might have a similar setup with the 20moa.
    No worries 👍

    Sent from my SM-T350 using Tapatalk

  6. #6
    AlphaOperator
    Guest

  7. #7
    Basic Member
    Join Date
    Sep 2012
    Age
    53
    Posts
    25
    Thanks. I went with the 1in height, like Rob01 said it wasnt that much of a difference. Thanks again

Similar Threads

  1. Replies: 9
    Last Post: 08-12-2017, 12:03 PM
  2. Replies: 2
    Last Post: 08-20-2013, 11:38 AM
  3. Replies: 3
    Last Post: 10-11-2012, 10:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •