Results 1 to 5 of 5

Thread: New Axis in 223

  1. #1
    Basic Member
    Join Date
    Nov 2015
    Location
    Greenville, NC
    Posts
    22

    New Axis in 223


    Picked up a new one. Took it out today after mounting a scope to a least get it on paper. Understand it may be a journey to make it an "accurate" rifle. I had some Olympic 223 ammo that I had squirreled away. Though it would be good for getting it on paper. I was surprised to find that about 50% of the ammo would not fire. Wondering if this is a problem with a weak firing pin spring or just bad ammo. Will run the "bad ammo" through an AR-15 later to see. Anyone else had a problem with a weak firing pin spring?

  2. #2
    Basic Member
    Join Date
    Jan 2015
    Location
    Austin
    Posts
    1,710
    Try some American Eagle Tipped Varmint, 50 grain and report back. It's cheap and part number is AE223GTV. Usually shoots sub 3/4 moa.

  3. #3
    smbob
    Guest
    I'd try some different ammo. PMC 55gr, Hornady 55gr, etc...

    Robert

  4. #4
    Team Savage wbm's Avatar
    Join Date
    Dec 2006
    Location
    New Mexico
    Age
    80
    Posts
    2,643
    Try some American Eagle Tipped Varmint, 50 grain and report back. It's cheap and part number is AE223GTV. Usually shoots sub 3/4 moa.
    +1.

  5. #5
    Basic Member
    Join Date
    Nov 2015
    Location
    Greenville, NC
    Posts
    22
    All good advice. I had planned to do some handloads since the results I did get with the rounds that fired was nothing to write home about.

Similar Threads

  1. Axis vs Axis compact MV
    By jw in va in forum Axis Series Rifles
    Replies: 2
    Last Post: 12-07-2017, 12:47 PM
  2. will Axis II trigger work in a standard Axis
    By needagun in forum Axis Series Rifles
    Replies: 3
    Last Post: 07-18-2017, 03:49 PM
  3. Axis and axis II stocks
    By Bobby in forum Axis Series Rifles
    Replies: 1
    Last Post: 05-02-2016, 09:40 PM
  4. Axis vs Axis 2 with accutrigger and scope
    By Xero in forum Axis Series Rifles
    Replies: 6
    Last Post: 08-22-2014, 05:33 AM
  5. Replies: 1
    Last Post: 05-05-2013, 05:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •