Reply With QuoteThe foam closes back into the hole. Use a #1 Philips and look real close for the small holes. If you find yourself needing a #2 use a lubricant on the shaft of the driver to help you turn it and not destroy the foam.
I have a Savage 12 LRPV, and I'd like to remove the recoil pad, I don't see any holes for mounting screws are they glued on? If so how do you go about removing them? On my PC I merely unscrewed it.
The foam closes back into the hole. Use a #1 Philips and look real close for the small holes. If you find yourself needing a #2 use a lubricant on the shaft of the driver to help you turn it and not destroy the foam.
The Dunning-Kruger effect is alive and well.
Those are glued on. You need a saw to remove them.
"As long as there's lead in the air....there's still hope.."
My bad.
The Dunning-Kruger effect is alive and well.
Glued on that's not good thanks
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks