Results 1 to 6 of 6

Thread: hot heavy barrel?

  1. #1
    Basic Member
    Join Date
    Dec 2014
    Posts
    144

    hot heavy barrel?


    I have an axis 2 heavy barrel in 223rem and notice after 10 shots the barrel is really hot.

    is this normal? My axis 1 sport barrel gets hot after 10 or so I figured the HB would be better.

  2. #2
    Basic Member
    Join Date
    Dec 2015
    Age
    57
    Posts
    95
    if your reloading perhaps your loads are running hot

  3. #3
    Basic Member
    Join Date
    Jan 2014
    Posts
    111
    Quote Originally Posted by ohihunter2014 View Post
    I have an axis 2 heavy barrel in 223rem and notice after 10 shots the barrel is really hot.

    is this normal? My axis 1 sport barrel gets hot after 10 or so I figured the HB would be better.
    What exactly is hot? Like, you can't wrap your hands around it hot?

    My 11 TPH .223 isn't too hot to touch after a string of 10 HOT loads.

    Sent from my SM-G920V using Tapatalk

  4. #4
    Basic Member
    Join Date
    May 2016
    Age
    47
    Posts
    118
    Heavy barrel doesn't get any less hot than a lighter barrel,however it doesn't vibrate as much which improves consistency.
    Heavy barrels still wear out just like thinner ones,the throats erode the same.
    So to answer your question yes heavy barrels heat up,just like thin ones. The benefit of them is consistency of point of impact even when hot,however they too have limitations.
    I shoot strings of 4 when plinking then allow the rifle to cool. I always take a few rifles with me so as one cools I'm using another.
    Rule of thumb is too hot to hold. If the barrel is so hot you can't hold on to it it's too hot and should allow to cool if possible. But every barrel is different and one might handle the heat better than others and still remain consistent. Heat does affect point of impact so it is good to know how it prints when hot,as in which way the poi moves when heating up.
    That's all I got bud. Happy shooting

  5. #5
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,813
    Have you ever cleaned the copper out of the barrel?
    The Dunning-Kruger effect is alive and well.

  6. #6
    Basic Member Russ77's Avatar
    Join Date
    Jul 2015
    Posts
    194
    I have an axis .223 heavy barrel and the barrel does get hot. How hot and how fast depends on how rapid I shoot. I try to take my time between shots and leave the bolt open. When the barrel is to hot for me to keep my hand on it I take a break and let it cool down.


    Sent from my iPhone using Tapatalk

Similar Threads

  1. barrel diameter on Axis heavy barrel model
    By needagun in forum Axis Series Rifles
    Replies: 2
    Last Post: 12-08-2015, 07:59 AM
  2. can i swap a sporter barrel to a heavy barrel? axis 223.
    By ohihunter2014 in forum Axis Series Rifles
    Replies: 4
    Last Post: 04-20-2015, 08:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •