Reply With QuoteIt is possible. You would have to get a blind mag stock made or use epoxy to lock the detachable magazine in place.
Is it possible to change a Axis over to a blind magazine type ? What would have to be done and what about making the change to the magazine?
It is possible. You would have to get a blind mag stock made or use epoxy to lock the detachable magazine in place.
The Dunning-Kruger effect is alive and well.
Was thinking about having a blind stock made, but can the clip type mag. be changed over to work in a blind type stock?Originally Posted by Robinhood
I can't say with all certainty but, many of us have blocked and epoxied magazines in place. This often includes modifying the location of the magazine. You can do it!
The Dunning-Kruger effect is alive and well.
How are you going to load it through that small port????
"As long as there's lead in the air....there's still hope.."
Very carefully!
I could see making an Axis a single shot, but trying to load a blind magazine would be very annoying to me. I have tried loading the magazine through the ejection port. While it is doable, it was a bit more of a hassle than loading a blind magazine normally is.
If you build it they will come.
The Dunning-Kruger effect is alive and well.
Well if I have to build it, I'd make the port bigger!
"As long as there's lead in the air....there's still hope.."
Posting Permissions
Bookmarks