About 2 weeks ago i made a post asking for help on a stevens 200 22-250 that use to shoot then after got it hot did not shoot went through everything on the rifle still would not shoot was sure barell was shot out remembered this spring reworked the beading and beded the barell nut but i did not tape off the recoil lug some to the bedding material seaped in on the 1 side of the lug and stuck to the lug only giving me about 20% bearing surface on the lug cleaned all that beding out on the lug and the barell nut back to 1 hole groups remember when your dad said if it is not broken dont fix it well i sould have listened so everybody that took the time to answer my posts now have every right to make fun of me so let me have it