What parts do I need to swap from dbm to blind mag. The action I bought was dbm and my stock is blind mag. I do not have the dbm parts.
If it's centerfeed, you can squeeze the magazine box in the center to remove the bottom plate, then use the box and follower with the factory magazine retainer clip to retain it into the stock. The part number for the magazine retainer clip is 106135 and is available from Savage Customer Service.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
I do not have a magazine at all. I'm needing everything to make the swap
Then it would help to know just what it is you're looking for. Savage builds magazines for several different cartridges.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
308
Stagger feed or centerfeed?
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
I think center feed. It's 4.40 spacing round top
Call Savage Customer Service and order the following parts:
Magazine Retainer Clip p/n 106135
Magazine box, short Std, NFS p/n 105663
Mag follower assy short p/n 106475
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Thank you
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks