I think I am done tinkering with this one...

[Digduggy]

My .223 M12 has been a shooter out of the box, but I built it up to match my 111 in 30-06, so it got the full treatment. The only stock pieces are the action body, trigger, and most importantly, the barrel. It has been faced, and has a ptg bolt, all mounted in a Mcree Chassis!

Buddy of mine threw some rounds together with the super cheap 55gr Hornady SP's over varget at max length for my AR, and I ran out of my own handloads so said what the heck lets see what these will do...

The results: approx 1/8" groups at 100yds. I wish I had a good picture of the group I did when I made the happy face, I was shocked!

Time to stop tinkering!

[hafejd30]

Looks like a nice setup. If you get one more thing I'd go with lower rings lol

[Digduggy]

Can't, QD's are tall go begin with, and 3006 is getting xlr chassis so need tall rings

[hafejd30]

I take it you run the same scope on both?

[Digduggy]

Yes, as well as others. I am going to build a long range AR and I have another 3006 I adopted that I will use it on.

Between the savages I know how to dial it to get it within a half inch.

[hafejd30]

Ok. Looks good and seems to be a shooter. Nicely done

[dfrosch]

9 twist? Try some 77 grain SMKs over Varget.

[Digduggy]

It is 9 twist, I will look into those

[GaCop]

My .223 M12 has been a shooter out of the box, but I built it up to match my 111 in 30-06, so it got the full treatment. The only stock pieces are the action body, trigger, and most importantly, the barrel. It has been faced, and has a ptg bolt, all mounted in a Mcree Chassis!

Buddy of mine threw some rounds together with the super cheap 55gr Hornady SP's over varget at max length for my AR, and I ran out of my own handloads so said what the heck lets see what these will do...

The results: approx 1/8" groups at 100yds. I wish I had a good picture of the group I did when I made the happy face, I was shocked!

Time to stop tinkering!

Nice rifle and nice place to shoot!