Reply With QuotePretty sure you can get those at an electrical Suppy Co. I doubt lowes ect would have them but might want to check...you could just drill and tap the one you have and stack washers on the back or use a shorter bolt.
Just watched a video on you tube where the guy had the annealeez and was putting it together. The thing that was different on his than mine was he had a thumbnut on the brass "ground clamp" that holds the torch. Getting the torch to sit right is the biggest pita part of using the machine. I emailed them to see if they offered that part as an upgrade.
Do any of you have that one? Is that a common enough configuration of clamp that you can get one at ace or similar place? I did a limited search and couldn't find one with two threaded holes.
Pretty sure you can get those at an electrical Suppy Co. I doubt lowes ect would have them but might want to check...you could just drill and tap the one you have and stack washers on the back or use a shorter bolt.
Jeff is sending me one. There is a great video about putting a flexible camera arm there for easy adjustment.
Posting Permissions
The sole purpose of this site is to provide an online community for those who wish to interact with other Savage firearm enthusiasts.
The information and opinions expressed within this site are those of its contributors, and in no way should be viewed as the opinions or recommendations of Savage Arms.
This site utilizes affiliate programs to generate revenue and as such purchasing a product reached by clicking on a link on this site may earn us a small commission on that sale.
Bookmarks