Results 1 to 5 of 5

Thread: 220gr. ELD-X and 300 winmag

  1. #1
    jammer300
    Guest

    220gr. ELD-X and 300 winmag


    I picked up a box of the 220gr. ELD-X today to try out in my 300 winmag and since I won't be able to load them for a couple of weeks I thought maybe I would see what kind of results others are having and what kind of load data, if any, other shooters may be willing to share. I'm shooting a Savage 111 trophy hunter in 300 winmag 1:10 twist and 24" barrel. Thanks for the help

  2. #2
    Basic Member
    Join Date
    Dec 2013
    Age
    39
    Posts
    245
    Haven't tried the new 220.... But I've been having good luck with the 212 and H1000, but I have a 27" barrel for the slow burning powders and heavy bullets.
    Honestly, if my gun still had your 24" sporter barrel on it, I would be trying the 200gr ELD-x and H4831 (or similar)
    Not sure what kind of velocity you'll be able to achieve with the 220 in a 24" but I'd be interested in hearing your results

  3. #3
    jammer300
    Guest
    I was looking for the 212gr ELDX with no luck so when I came across the 220's i grabbed them figuring I would give them a shot. Hopefully with any luck I can get a good load established. I just flew back to work today so I won't be able to work on it for the next 2 weeks.

  4. #4
    jammer300
    Guest
    I was finally able to get some time to load some of these 220gr ELDX for my 300 winmag and hit the range today. I was loading all of these loads using Hornady brass and WLRM primers. I started with 61.5grs of H4350 and worked up to 65grs in half grain increments. I loaded 3 rounds per charge weight. My best load came in at 64.5grs with a velocity of 2727fps. and a group size of 0.842" @100yds. I was also able to load a few with IMR7828SSC. 3 rounds with 70grs and 3 rounds with 70.5grs of IMR7828SSC. I had an average velocity of 2867fps with the 70.5gr charge and a group size of 1.25" @ 100 yds. I'm hoping that by playing with seating depth I can tighten that one up a little bit. My c.o.a.l was 3.480" to still fit in my magazing.

  5. #5
    Basic Member
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507
    Using 220 Nosler Cust. Comps. in my 300 I used Retumbo & N570 (Viht - $$$$) in the upper ranges - around 78.0 to 80.0gr.

    Ya know what I would do?
    Go here:
    http://www.hodgdonreloading.com/data/rifle

    Magnum caliber / heavy long bullet = slow burning powder & lots of it.
    Last edited by fgw_in_fla; 03-22-2016 at 08:30 PM.
    'Scuse me while I whip this out...!

Similar Threads

  1. 264 winmag and imr7977?
    By keeki in forum Ammunition & Reloading
    Replies: 1
    Last Post: 05-11-2017, 08:12 PM
  2. 300 winmag headspace
    By adam38654 in forum 110-Series Rifles
    Replies: 2
    Last Post: 08-06-2016, 08:57 PM
  3. .300 WinMag FCP HS-Precision
    By Jettn in forum 110-Series Rifles
    Replies: 19
    Last Post: 10-13-2014, 02:52 PM
  4. 375 h&h to 300 winmag
    By AKsavage907 in forum 110-Series Rifles
    Replies: 5
    Last Post: 05-23-2014, 05:57 PM
  5. Anybody loading 220gr prohunters in 308 ??
    By tammons in forum Ammunition & Reloading
    Replies: 9
    Last Post: 10-30-2009, 03:15 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •