The trigger was very heavy with the spring turned all the way out.
I ordered "target" springs from GS, they never got here.
I took the trigger off, cleaned everything, oiled everything.
With the spring turned all the way into the bar-thing, with a Dremel, I cut off half a turn on the big end of the spring, put it together and tried to slam fire-then tried the trigger.
Then repeated.
With 2 turns or so cut off, it slam fired.
With the spring turned out, it stopped slam firing and the trigger felt good.
The spring big end doesn't seem to need that tit sticking out, the spring just pushes on the tang.
I shot the rifle today, 32 shots, the trigger is MUCH better. It ain't a true target trigger, but it's fine and I can live with it forever.

I do love that Dremel. I don't like that "E" ring on the trigger mounting pin-does anyone know where I can buy half a dozen? I know I'll lose one.
joe b.