Bolt head swap

[brianlt21]

Can somone walk me through how to change a dolthead and baffle on the new model 11 trophy hunters with 2 piece firing pin

[darkker]

???
The same way you always take them apart.

Start with the BAS, pull the first spring and washer out. Inside the cocking ramp area, move the second spring out of the way, to pull the cocking piece out. Pull the rest of the firing pin out of the bolt.
Compress the Bolt head washer against the bolt body, pop the pin out, then VIOLA! head and baffle come off.

Or you could RTM,
Or if you need to see it: https://www.youtube.com/watch?v=BuY8wGb-UBk
Or search this forum: http://www.savageshooters.com/showth...th-disassembly


Cheers