Reply With QuoteDon't know of anyone making a glue in one. If it's a centerfeed action you could use one of the SSS adapters and just glue it in place, but I really don't see the need to do so.
Anyone know a source for a glue in SS adapter for a stagger feed?
I have the slip in but want a glue in.
Thanks
Don't know of anyone making a glue in one. If it's a centerfeed action you could use one of the SSS adapters and just glue it in place, but I really don't see the need to do so.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I agree, the Sharp Shooter Supply (SSS) single shot adapter is your best bet. It can be filed off at the rear for a tight fit in a stagger feed action. A drop of glue will keep it in place. If you have a Savage OEM metal DBM frame assembly (surround), then the Fred Sled single shot DBM adapter works very well.
I have 2 center feeds and just picked up a stagger.
I have the SSS glued in the centers already guess I'll pull one out of the action
and see if the measurements look doable.
If I get JP right the center feed cut out is a little larger which will work just fine.
I run my sav's as single shots and have no wish to go back so I epoxy them in.
Posting Permissions
Bookmarks