Results 1 to 4 of 4

Thread: LRPV back to 6 mm BR

  1. #1
    New Member
    Join Date
    Dec 2015
    Posts
    5

    LRPV back to 6 mm BR


    I have a Savage LRPV that started as a 6mm BR. I got it used, and changed it to a 20 TAC, then later to a 223AI 8 twist. I got the 6mm BR back together today. It now has a CBI 28" 6mm BR 8 twist back on it. The scope is a Sightron S3 8 x 32. Can't wait to shoot it, but we are getting 12" to 18" of snow, don't know when I can get in to the range. The Striker is also a 6mm BR CBI 8 tw 15" I have shot the Striker, it shoots very well sub 0.5" at 100 yds down to 0.25" sub 1 " at 200 yds.

    Mark Schronce
    Last edited by MarkS; 01-23-2016 at 10:16 AM.

  2. #2
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788
    Very nice

  3. #3
    Basic Member Kingair001's Avatar
    Join Date
    Dec 2015
    Posts
    246
    Keep us posted !

  4. #4
    Basic Member
    Join Date
    Mar 2015
    Posts
    184
    Out of the three calibers you went through what is worth mentioning about each? I am interested in the 20 tac, 223ai and the 6br or 6 dasher.

Similar Threads

  1. Accuracy potential flat back vs round back
    By coance in forum 110-Series Rifles
    Replies: 9
    Last Post: 07-11-2018, 08:43 PM
  2. LRPV Going Back
    By bvil in forum 110-Series Rifles
    Replies: 6
    Last Post: 05-31-2015, 02:03 AM
  3. round back or flat back receiver
    By snunty in forum Optics
    Replies: 7
    Last Post: 04-27-2010, 11:22 AM
  4. just got the LRPV back from the gun smith....
    By Ring31 in forum 110-Series Rifles
    Replies: 3
    Last Post: 03-14-2010, 02:15 PM
  5. 12 LRPV DBM and 12 LRPV Dual port bolt swap?
    By curiousaussie in forum 110-Series Rifles
    Replies: 7
    Last Post: 02-07-2010, 11:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •