Egw O moa base

[bobcat30]

Can i get buy with burris extreme tactical low rings for a 44mm obj scope mounted on egw 0moa base? Iknow i need medium for 50 mm obj

[bobcat30]

42 mm not 44 my bad thanks in advance.

[rjtfroggy]

Yes-yes and maybe.

[bobcat30]

so yes to the low rings?

[rjtfroggy]

low rings will work for the 42-44mm scope. they might even work for the 50mm scope that one depends on the barrel.

[bobcat30]

thanks

[mammynun]

This is a Millett TRS-1 (50mm obj) in Burris "Xtreme" low rings (.250"). They're sitting on a cheap Weaver rail (~.200", pretty sue the EGW is thicker). The rifle is a Savage 12FCV and the barrell is a hair less than 1" where the bell of the scope is positioned. hope this helps!

[img width=600 height=450]http://i275.photobucket.com/albums/jj307/mammynun/weapon%20stuff/P6232675.jpg[/img]

[boy412]

I had a Nikon Monarch X (2.5-10x42) mounted on an EGW 0 MOA base, with low XTR rings and there was plenty of clearance on my 12LRPV.

[bobcat30]

yup got it all mounted up and should have no problem in the future putting a 50mm obj on either. Thanks