When I took the sights off my Hog Hunter I used the allen screws that came out of the receiver where the scope bases mount.
I just bought a M11 bbl with holes for sights. Can you tell me the screw size and where I could buy filler screws?
Thanks;
joe b.
When I took the sights off my Hog Hunter I used the allen screws that came out of the receiver where the scope bases mount.
^^^^good point. If you don't have them, I am sure you can get them from Savage
Sometimes they don't even charge for inexpensive, light parts like that.
I wouldn't bother with plug screws. Fill the holes in with a black crayon. It will seal out the moisture and is a lot easier getting out if you need the holes again.
"As long as there's lead in the air....there's still hope.."
Bookmarks