Results 1 to 10 of 10

Thread: Finished my 300WM, Thanks Mr Jim@NSS

  1. #1
    nonnieselman
    Guest

    Finished my 300WM, Thanks Mr Jim@NSS


    I traded a set of cyl heads for a Savage 110 7mag, ordered a 300wm barrel from Northland SS and put it on after i got it threaded for the muzzle brake (waiting on a suppressor :D)

    It was lonely without its scope...
    [img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300ns.jpg[/img]

    Shrewd Brake
    [img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300brake.jpg[/img]


    On the way home from work yesterday we stopped by the range to test some different loads and run them over the chrono..

    Traded a nitrous kit for the scope :D

    Millet LRS 6-25x56, 20MOA EGW Base, TPS 35mm Rings, Rifle Basix trigger, Factory Savage 112 300wm 26" Barrel, NSS Heavy duty recoil lug, Choate US stock.

    [img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300OB.jpg[/img]



    300yds
    Best group was 1.625" with a 210gr Berger, 71grs powder, Win LR, 2750fps.
    Worst group was 2.5" with 72grs.

    [img width=600 height=450]http://img.photobucket.com/albums/v459/nonnieselman/Shooting/300yds.jpg[/img]




    Got a 600yd match Saturday so i gotta hurry up and work on a load that will do 1.5" or less at 300.

  2. #2
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    3750 fps with 210 berger ?

  3. #3
    nonnieselman
    Guest

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Thats what the Chrono said and its a couple grains under the max load..

  4. #4
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    just seams high to me
    the last 300wm i had i could push a 150 nbt at 3600
    with a max load of h1000

  5. #5
    Basic Member
    Join Date
    Dec 2006
    Posts
    125

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Maybe 3150. But not 3750. Check it another chrono
    I could only get 3250 in a 300 rum and 208 amax. And that was HOT
    112,223,choate uv,nikon 6-18<br />lrpv,204,hs stock,sightron S3 6-24x50<br />12 target,McGowen 6mmbr,SSS hbr,Sightron S3 8-32<br />Mark II,22lr,thumbhole,Tasco 6-24x40<br />11 youth,243,Simmons 2.5-10x50<br />116fcss 30-06<br />12fv,204,VX-3 4.5-14x50

  6. #6
    pa hog
    Guest

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Nice rig, Should be a good long range deer gun. Judging by your picture, setting the Chronograph in the shade is probably giving you messed up readings. 3750fps is impossible in that set-up.

  7. #7
    nonnieselman
    Guest

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Brain Fart!!!

    2750fps... i didnt even pay attn to what i was typing... ::)


    Sorry guys..



    Actually i was just checking to make sure you guys were paying attention... Good job!
    ;D

  8. #8
    nonnieselman
    Guest

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Shot again yesterday, seems the average is 1.75" at 300yds.. ill take that anyday, but would love to have it closer to 1.5".

    Average velocity out of 60rds is still 2750fps.

  9. #9
    Basic Member
    Join Date
    Sep 2008
    Age
    74
    Posts
    57

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Good looking rifle, shooter and lots of luck.

  10. #10
    nonnieselman
    Guest

    Re: Finished my 300WM, Thanks Mr Jim@NSS

    Quote Originally Posted by lucy123
    Good looking rifle, shooter and lots of luck.
    I been workin on the load some more and managed a 2.5" and a 1.5" at 600yds.

    [img width=337 height=450]http://img.photobucket.com/albums/v459/nonnieselman/moto_0196.jpg[/img]

    Perfect evening for load testing, no wind, very very little mirage goin straight up.

    Now if it will just keep doin that i will be happy!!!

Similar Threads

  1. I finished my 338 Edge
    By travistodd1 in forum Picture Post
    Replies: 3
    Last Post: 09-15-2016, 09:15 PM
  2. Pretty much finished.
    By Kadams1563 in forum Picture Post
    Replies: 8
    Last Post: 02-17-2016, 01:24 PM
  3. Finished the 6.5-06
    By Txhillbilly in forum Picture Post
    Replies: 19
    Last Post: 04-28-2014, 04:48 AM
  4. finished 300 ultra
    By huntnm2001 in forum Picture Post
    Replies: 0
    Last Post: 01-13-2014, 05:25 PM
  5. Finished first project
    By rcreel in forum Member Builds & Range Reports
    Replies: 3
    Last Post: 09-28-2009, 03:00 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •