Results 1 to 11 of 11

Thread: Possibilities for changing 10 .308 to something else SA?

  1. #1
    jordyc
    Guest

    Possibilities for changing 10 .308 to something else SA?


    I have a chance to buy a savage 10 pre accutrigger in .308 which has a beat wooden birch stock for $200. I was thinkijg of getting it and starting a project to switch it over to something different like a 6mm or 6.5, 260,etc. I would like to keept the action and buy a new stock and a heavier barrel and not need a new bolt etc. I already have a .243 so a mid range low recoil option sounds fun for this build. Any suggestions? I d also like to go with a choate stock in a non AR style, just stick with traditional set up. Thanks all.

  2. #2
    GrumpyGuns
    Guest
    I am in the process of puting together the parts and funds for a 7mm-08. Not as much of a barrel burner as the 6.5's but still shoots high BC pills at resonable speeds.

  3. #3
    Basic Member
    Join Date
    Feb 2012
    Location
    Michigan
    Posts
    650
    6.5 creedmore if you don't reload

    260 if you do

    Both are good mid/long range calibers for targets/hunting.

    The "help me decide" section has a thread titled "260 or 308" there's lots of good opinions regarding these calibers in there if you get a chance to read
    Last edited by hafejd30; 12-26-2015 at 09:34 PM.

  4. #4
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788
    Quote Originally Posted by hafejd30 View Post
    6.5 creedmore if you don't reload

    260 if you do

    Both are good mid/long range calibers for targets/hunting.

    The "help me decide" section has a thread titled "260 or 308" there's lots of good opinions regarding these calibers in there if you get a chance to read
    ^^^^^^^^^^^^This^^^^^^^^^^^^

  5. #5
    jordyc
    Guest
    Ive check midway and other shops online and it seems brass for both is hard to come by. Is this an xmas anomoly or its just hard to find for both. I do reload so im not worried aboit that aspect. Shoukd I be looking at a diffent store for brass. Suggestions

  6. #6
    Basic Member
    Join Date
    Feb 2012
    Location
    Michigan
    Posts
    650
    They have 260 lapua brass at midwayusa now. $95/100. The lapua is worth the cost. And if you look at it compared to say Hornady it isn't much difference.

    Looked a few months ago at 308 brass. Hornady was $40/50 lapua was $80/100. Lapua being the better quality in my opinion.

  7. #7
    Basic Member dfrosch's Avatar
    Join Date
    Jun 2008
    Location
    Pearland, TX
    Age
    63
    Posts
    378
    Welcome to the forum Jordy,

    The 6.5s are all good cartridges. But there's not a whole lot that they will do that your 243 won't do. I'd suggest you go with a 7mm-08 or a 308.
    VISA loves me since I joined this site.

  8. #8
    jordyc
    Guest
    This is why I joined this site. Tons of info. Thank you everyone

  9. #9
    Basic Member
    Join Date
    Feb 2012
    Location
    Michigan
    Posts
    650
    Quote Originally Posted by dfrosch View Post
    Welcome to the forum Jordy,

    The 6.5s are all good cartridges. But there's not a whole lot that they will do that your 243 won't do. I'd suggest you go with a 7mm-08 or a 308.
    The 260 is a better choice since he reloads. 260 beats the 308 in ballistics across the board. It's similar to 243 but the setup (barrel length/accuracy) will determine the advantage. A 260 with a 20" barrel may not give you as many advantages for the mid/long range shooting over the others. 260 gives decent bc bullets that extra speed the need to accomplish the longer shots more easily. The 308 and 7mm-08 imo lack the powder capacity to achieve the best velocities with the heavier/higher bc rounds. 243 achieves the speed but lacks in wind drift etc due to the lighter bullets when you get out there a ways. But again the velocities and barrel accuracy will be determined on length/quality of barrel.

  10. #10
    Basic Member dfrosch's Avatar
    Join Date
    Jun 2008
    Location
    Pearland, TX
    Age
    63
    Posts
    378
    Quote Originally Posted by hafejd30 View Post
    243 achieves the speed but lacks in wind drift etc due to the lighter bullets when you get out there a ways.

    The BC difference between the 6mm 107 grain SMK and the 6.5mm 140 grain SMK is negligible. The BC on Berger bullets favor the 6.5mm, but only by about 6 or 7 percent. They can be launched at similar velocities from their respective 308 based cartridges. Wind drift is a function of BC and muzzle velocity, so the difference there would also be negligible. The 260 might have a very slight edge.
    VISA loves me since I joined this site.

  11. #11
    Basic Member
    Join Date
    Aug 2012
    Age
    64
    Posts
    247
    Quote Originally Posted by hafejd30 View Post
    6.5 creedmore if you don't reload

    260 if you do

    Both are good mid/long range calibers for targets/hunting.

    The "help me decide" section has a thread titled "260 or 308" there's lots of good opinions regarding these calibers in there if you get a chance to read

    Is the possibility of using Lapua brass that much of a difference? You can push the 260 just a smidge faster but other than that I don't see much of a difference between the two. I have several loadings on my 6.5 CM brass and have only tossed a few for loose primer pockets. I can buy factory Hornady 140 amax, Winchester 140's and Prime 130 for less than $25/box, and then use the brass for reloading as well.

Similar Threads

  1. model 12 barrel twist possibilities
    By 1953greg in forum 110-Series Rifles
    Replies: 8
    Last Post: 11-06-2016, 11:49 PM
  2. Changing 30-06 to .243
    By prcn in forum 110-Series Rifles
    Replies: 6
    Last Post: 07-04-2013, 12:08 PM
  3. 6.5x284 short action mag possibilities. Help
    By jo191145 in forum 110-Series Rifles
    Replies: 9
    Last Post: 01-20-2012, 09:24 PM
  4. Changing the mag. box
    By Sharpshooter_308 in forum 110-Series Rifles
    Replies: 2
    Last Post: 11-02-2010, 10:01 AM
  5. Changing VLP to 6BR?
    By dangaff in forum 110-Series Rifles
    Replies: 7
    Last Post: 09-24-2010, 03:53 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •