Results 1 to 5 of 5

Thread: 110 cdi dbm saum

  1. #1
    New Member
    Join Date
    Dec 2012
    Age
    60
    Posts
    5

    110 cdi dbm saum


    I'm starting to consider a project and need some help from you guys.
    Plan is to build a mag feed 7mm short action ultra mag on a 110 action (currently .270) for all out long range tactical using the new berger 195gr .8bc bullets. I have several SA savages but not had dealings with either 110 or ultra mag cases before.
    My thoughts are to use the CDI AI bottom metal to get a slick mag system with 5/10 shots.
    Q1 will it feed the Saum case reliably and at what oal?
    Q2 I intend to use a GRS laminate stock that comes inletted for a BM LA 110. Is the CDI DBM a drop in part?
    Appreciate your thoughts
    Rup

  2. #2
    New Member
    Join Date
    Dec 2012
    Age
    60
    Posts
    5
    Someone here must know or be able to point me to someone that does know if the CDI/AI mag will work with SAUM?

  3. #3
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,463
    Why not just call Jeff at CDi and ask him?
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  4. #4
    New Member
    Join Date
    Dec 2012
    Age
    60
    Posts
    5
    Yes, reckon I'll have to do that.
    Had hoped to discuss with someone that has done a similar build.

  5. #5
    New Member
    Join Date
    Dec 2012
    Age
    60
    Posts
    5
    For anyone that picks up this thread from a search, this is the prompt and informative reply from Jeff.
    After I have recovered from the Christmas poverty, I think I'll go for the 308 mag suggestion as want more than 5 shot mag and will only be using moderate loads so 2.95" should work.

    Hi the stock will need some inlet work, but it wont be much depending on how they do their inlets.
    You have a couple options on setups with a WSM or RSAUM.
    you can run a 5 round 338 lapua mag magazine in a long action setup like you have or you can use our Savage long action/308 box mag DBM. It allows the use of the fatter rounds and there are several mag options available..typically we would use 308 mags and mod the feed lips. the 308 mags will be limited to 2.950" OAL. if you need longer the 338 mag is the way to go..only downside is only 5 round mags available..thanks

    Jeff

    Check Out our Official online Store here:
    www.cdiprecisiongunworksstore.com

    Thank you very much,
    Jeff and Pam Allen

    CDiPrecision Gunworks
    1852 University Parkway
    Sarasota Florida 34243
    www.cdiprecisiongunworks.com
    www.cdiprecisiongunworksstore.com

Similar Threads

  1. 7 saum
    By jhehl in forum 110-Series Rifles
    Replies: 4
    Last Post: 01-08-2017, 10:37 PM
  2. 6.5 saum nah!
    By Savageman25 in forum 110-Series Rifles
    Replies: 16
    Last Post: 06-03-2016, 10:35 AM
  3. 6.5 saum
    By trailrider121 in forum Ammunition & Reloading
    Replies: 12
    Last Post: 07-02-2014, 11:07 AM
  4. 25/300 SAUM
    By mutwagn in forum Ammunition & Reloading
    Replies: 1
    Last Post: 05-01-2012, 10:49 AM
  5. 7mm saum
    By bogger01 in forum 110-Series Rifles
    Replies: 3
    Last Post: 08-07-2011, 01:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •