Devcon with Kiwi neutral shoe polish as a release agent is hard to beat
With my new barrel almost here I am almost set. But I want to bed this rifle in the duramaxx stock before the load development begins. I've printed off the article on here about improving that stock as my guide and watched a bunch of youtube videos on it. Still a bit aprehensive about it... anyway which bedding component would you all recommend for a beginner?
Devcon with Kiwi neutral shoe polish as a release agent is hard to beat
I use Wheeler Bed Rock with great results. I've learned that glass bedding is only ever as good as the preparation you do on the stock, so take your time with it and pay close attention to detail. It will be worth it in the long run regardless of which bedding material you use.
[I]"In the end, run what 'ya brung because it's better than nothing and don't give two ****s what some interwebs chat board guy says about your rig."[/I]
I used arca glass kit from Brownell. It came with the mixing cups and release agent. Little runny but worked great. I used plumbers putty to fill in all the holes because it's what I had. It came out real nice, feels like I could shoot it without the action screws.
What he said! ^^^^^^
Devcon, kiwi shoe polish and modeling clay are what I use/used.
I was a little nervous on mine first one too....i removed material and checked, rechecked, and rechecked some more lol. Made sure it all fit right and mixed up the devcon and let it roll. Seemed to turn out ok, some of the guys here said so too.....
either it was ok or they were lying....lol
Youll be fine, just take your time and pay attention.
Scooter
I'm the Boss. I make sure what she wants gets done.
Bookmarks