Reply With Quotei just got the blue thumb hole, same thing. trigger guard ,had to cut it .125 deeper rear screw works but the front screw is a bit short.take your time with a dremmel or small router,you will love the way it shoots afterwards. MARK25-06
Definitely sent me the wrong stock. Action screw spacing is 5 1/4" . My recoil lug sits right on the top of the front action screw hole. I hate that when it happens.
Just received my Tundra thumbhole stock from Stocky's I have a couple of questions for the pros. I have a Stevens 200 .223 with center feed mag, 4.4" spacing, and the mag is attached to the stock. I see where the action screws are too short, ( wish they would have mentioned that ), I see where the trigger guard recess will have to be enlarged, and I also see that the recoil lug recess is not even there. There is a recess but more than an inch away. Am I seeing normal problems or did they send me the wrong stock? The SKU is sav50004s. I will call on Monday but if all is well I can start to modify, hopefully not butcher ), the stock this weekend. Thanks to all who reply. smoker
i just got the blue thumb hole, same thing. trigger guard ,had to cut it .125 deeper rear screw works but the front screw is a bit short.take your time with a dremmel or small router,you will love the way it shoots afterwards. MARK25-06
I can contend with a screw hole being off a little but the screw spacing is 1" too long and there ain't no way to make a fix. Very nice stock. Did your original action screws work or were they too short? smoker
You have the wrong stock. Nothing should be that far off.
"As long as there's lead in the air....there's still hope.."
Yep, that was a bummer. Was looking forward to using it this weekend in an informal shoot. smoker
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks