Yeah, learn to shoot right handed! ;DOriginally Posted by ofdscooby
I would like to put a new stock on my 116 in 7mm this is my primary hunting rifle. I have had a little trouble finding and AFFORDABLE left handed stock. Any Sugestions? I would like to keep it synthetic
Yeah, learn to shoot right handed! ;DOriginally Posted by ofdscooby
buy a right hand stock and have a notch on both sides.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
If it's a stagger feed then the B&C Carbelite is made in a LH config. if you want inexpensive.
A Stockade Money Saver is available in LH and they go for $175.
+1Originally Posted by Blue Avenger
I bought a black duramax, cut the left bolt port, and then when I got sick of staring at that ugly hole on the right side I filled it in with some bondo and painted it with some krylon paint. Easy to do! just be patient (especially if you are using a dremel tool)
the duramax imho is one of the best buys for the money. plenty rigid for me and a good recoil pad to boot.
What about the detachable box how do I get around that it doesnt look like the aftermarket stocks are set up for those and if I go with a right handed stock and notch it out will the mag release button be on the wrong side
????? You have the older stock with the button on the side?????
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
yes
no one made a synthetic for that style gun that I am aware of. I just got done searching for a stock after mine was broken during shipping. No one ever responded to me that they could or could not make a stock to replace my broken left hand stock. I contacted most of the makes and am proud to say not a single one answered!!!!!
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
great well thanks for saving me some time in searching for a new stock
Oh well... I was looking also. Glad/sad I 'm not the only one to never get an answer. Guess I'll get by with the factory wood for now.
Be Well...
Bookmarks